The Matrix wood stove uses the same engine as the proven Osburn 2000. However, its clean and modern look is sure to bring a European touch to your room. The top of the stove is made of cast iron with two rich pieces of soapstone, which remind us of the renowned Finnish fireplaces.
Optional soapstone side shields are also available. Logs can be conveniently placed underneath the large firebox, making the Matrix a practical and elegant heating machine.
Iron Wood Supply now has FREE SHIPPING and FREE LIFT GATE SERVICE on every product! You really can't beat that now can you?
|Fuel type :||Dry cordwood|
|Recommended heating area (sq.ft.) :||750 - 2,100|
|Firebox volume (cu. ft.) :||2.4|
|Maximum burn time :||8 h|
|Maximum heat output (dry cordwood) :||75,000 BTU/h (22.0 kW)|
|Overall heat output rate (min. to max.) :||12,500 BTU/h (3.7 kW) to 31,300 BTU/h (9.2 kW)|
|Average overall efficiency (EPA cribs / Douglas fir)||69.5 % (HHV)||75.2 % (LHV)|
|Average overall efficiency (dry cordwood) :||N.A. (HHV)||N.A. (LHV)|
|Optimum efficiency :||77.2 %|
|Average particulate emissions rate :||3.9 g/h|
|Average CO :||137.4 g/h|
(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3) As measured per CSA B415.1-10 stack loss method.
(4) Higher Heating Value of the fuel.
(5) Lower Heating Value of the fuel.
(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7) Optimum overall efficiency at a specific burn rate (LHV).
(8) This appliance is officially tested and certified by an independent agency.
(9) Carbon monoxyde.
|Maximum log length||20"|
|Log positioning||Over width|
|Flue outlet diameter||6"|
|Minimum chimney height (feet)||12'|
|Baffle type||High heat-resistant C-cast|
|Approved for a mobile home installation||Yes|
|Weight||537 lb (244 kg)|
|Door type||Single, glass with cast iron frame|
|Glass type||Ceramic glass|
|Glass surface – dimensions (Width X Height)||19 5/8" X 11 7/8"|
|Overall dimension (Height)||36 7/8"|
|Overall dimension (Width)||27 1/8"|
|Overall dimension (Depth)||25 5/8"|
|Door opening – dimension (Height)||8 3/4"|
|Door opening - dimension (Width)||17 1/2"|
|Firebox – dimension (Height)||12"|
|Firebox – dimension (Width)||21"|
|Firebox – dimension (Depth)||16 1/2"|
|Steel thickness – body||3/16"|
|Steel thickness – top||5/16"|
|Centre line of flue outlet to the side||13 1/2"|
|Centre line of flue outlet to the back||6 3/8"|
|USA standard (emissions)||EPA Method 28|
|Canadian Standard (emissions)||CSA B415.1-10|
|USA standard (safety)||UL 1482, UL 737|
|Canadian standard (safety)||ULC S627|
|Tested and listed as per applicable standards||By an accredited laboratory (CAN/USA)|